ABUS TVIP31550 - Manual (Page 117)

117
Primary DNS server: First server address used where the camera attempts to
convert the DNS names into IP addresses.
Secondary DNS server: Alternative server address used where the camera attempts
to convert the DNS names into IP addresses.
Accept the settings by pressing “OK” or cancel them by pressing “Cancel”.
WPS
WPS (Wi-Fi Protected Setup) is a simple method for establishing a secure wireless network connection
(WPA, WPA2). Consult the manual for your access point (e.g. router with WPS function) regarding the
necessary steps for setting up the WPS function.
WPS:
Activate the WPS function here, when necessary.
Configure via: PBC:
Push Button Configuration – Secure wireless connection is set up by pressing the
button on the access point or network camera.
PIN:
Secure wireless connection is set up by entering the PIN in the network camera and
access point. Press the “Neue PIN erzeugen” button to assign a new random PIN.
This PIN must then be made known in the access point (WPS settings). Press
“Start”. The network camera and access point are then automatically connected to
each other via a secure connection.