ABUS TVIP31550 User Manual
Page 135
135
Delete sequence number:
Resets the sequence number to 1.
Alarm:
Select the event which triggers the storage procedure on the SD-Card.
Motion detection:
All set activity masks.
Network link down:
Limited network connections. The configured alarm buffer can be used (see
the “Alarm buffer” section).
Alarm input:
The activated digital input can represent the trigger.
Recording time:
Select the recording time on a network drive following an event (1-60
seconds).
Effective Period:
Always:
The detectors for these alarms are permanently activated.
Schedule:
The detectors for these alarms are activated at defined schedules. Press the
“Schedule” button to configure these settings (see also the “Schedule”
section).
Accept the settings by pressing “OK” or cancel them by pressing “Cancel”.
Periodical recording
Periodical recording:
Define the settings for continuous recording SD-Card here. The recording time
can be defined using a schedule.
Image file name:
Specify the file name for the video file here.
Suffix:
Select the file suffix here. This can be the date and time or a sequence
number.
Delete sequence number:
Resets the sequence number to 1.
File size:
Indicates the maximum file size (max. 50 MB).
Recording time
Always:
The detectors for these alarms are permanently activated.
Schedule:
The detectors for these alarms are activated at defined schedules. Press the
“Schedule” button to configure these settings (see also the “Schedule”
section).