ABUS TVIP31550 User Manual
Page 115
115
Accept the settings by pressing “OK” or cancel them by pressing “Cancel”.
IP Notification
The “IP Notification” function can be used to send information on network settings to an e-mail address.
IP Notification:
Activates or deactivates the function.
Notify type:
Select the area for which information should be given here.
SMTP server name:
Enter the SMTP server name of the e-mail sender here (e.g. smtp.web.de). The
maximum length is 64 characters.
SMTP server port:
The default SMTP server port is 80. An alternative port can be specified here, if
required.
SSL:
If the e-mail server uses SSL, then this can be activated here.
Authentication:
Specify the authentication type for the e-mail account here.
SMTP:
If authentication is made using a user name and password on the e-mail server,
then this option must be activated.
POP before SMTP:
Select this option if the send/receive e-mail function is required before e-mails are
sent. It may be possible to delete “POP before SMTP” in the e-mail account
settings.
POP server name:
Enter the POP server name of the e-mail sender here (e.g. pop.web.de). This option
is only available when “POP before SMTP” is active. The maximum length is 64
characters.
User name:
User name of the e-mail account.
Password:
Password of the e-mail account.
Recipient e-Mail address:
The e-mail address of the recipient. The maximum length is 64 characters.
Administrator e-Mail address: The address of the e-mail account. The maximum length is 64 characters.
Subject:
Enter a subject here (max. 64 characters).
Message:
The message must not exceed 384 characters.
Tags can be used to integrate specific camera information into the
message.
Placeholder Description
<ip> IP
address
<port>
HTTP port number
<mac>
Device (MAC) address
<product> Product
name
Accept the settings by pressing “OK” or cancel them by pressing “Cancel”.