Autel MaxiCheck EPB - Manual (Page 117)

115
【2】Reset adjustment to 0
【3】End with programming (the new value is permanently stored)
【4】End without programming (the old value is retained)
A. Enter new value for adjustment
From the Starting Basic Inspection Quantity menu (Figure 11.13)
use the LEFT/RIGHT scroll button to select 【1】 and press the OK
button. The screen displays as below. You will need to input a new
value for fuel delivery rate adjustment.
Figure 11.14
The three keys at the bottom of the screen work as below.
[Finish]: After entering a new value, use this key to save the value
to the tool.
[Show]: Press this key to pop up a soft keyboard to facilitate your
input. (Figure 11.15)
[Esc]: Press this key to exit.