Autel MaxiCheck EPB - Manual (Page 119)

117
1) From the service functions menu (Figure 11.11) use the
UP/DOWN scroll button to select Injection rate and press the
OK button.
2) The tool communicates with the vehicle and reads the fault
codes memory. Follow the on-screen instructions to finish this
procedure.
3) Then the tool will display as below. In this function, you can
enter new value for matching, or reset matching to 100%.
Figure 11.16
The option keys at the bottom of the screen work as below.
【1】Enter new value for adjustment
【2】Reset adjustment to 100%
【3】End with programming (the new value is permanently stored)
【4】End without programming (the old value is retained)
A. Enter new value for adjustment
From the Injection rate menu (Figure 11.16) use the LEFT/RIGHT
scroll button to select 【1】and press the OK button. The screen
displays as below. You will need to input a new value for injection
volume matching.