Autel MaxiCheck EPB - Manual (Page 22)

20
with the vehicle. Contact your local distributor or the
manufacturer’s customer service department for assistance.
7） View a summary of system status (MIL status, DTC counts,
Monitor status) on screen. (Figure 5.1 ) Press ESC button for
Diagnostic Menu (Figure 5.3) to come up.
Figure 5.1

If more than one module is detected, you will be prompted to
select a module before testing. (Figure 5.2 )
Figure 5.2

Use the UP/DOWN scroll button to select a module and press
the OK button.
5.1. Read Codes
 Reading Codes can be done with the key on engine off (KOEO)
or with the key on engine running (KOER).