Autel MaxiCheck EPB - Manual (Page 92)

90
1) From the diagnostic function menu (Figure 9.26) use the
UP/DOWN scroll button to select Diagnostic Trouble Codes
and press the OK button.
2) Use the UP/DOWN scroll button to select Clear DTC
Information and press the OK button. (Figure 9.27)
3) A warning message will come up asking your confirmation.
Figure 9.29
4) Select Yes to continue or No to exit. When the command is
sent, the tool will display a message as below:
Figure 9.30
5) To make sure the codes are erased completely, perform Read
DTC Information function to verify.
C. Data Display
This function enables users view SRS-related data readings from a
selected ECU. With the live data screen displayed, you can view the