Autel MaxiCheck EPB - Manual (Page 78)

76

For some vehicles, the ABS and SRS systems are divided into
two systems. SRS is located in Body system, while ABS is
located in Chassis system. In this case, you will need to select
the correct system to run the desired diagnostics.
Figure 9.3
B. Manual vehicle entry
This mode allows users to input and save specific vehicle
information (i.e. PCM Part Number, Vehicle Calibration Number
Tear Tag, and VIN) manually. This function enables direct access to
the vehicle‘s ABS system and makes the diagnostic testing more
convenient, saving time doing step-by-step entry selections. (Taking
Ford as an example)
1) Select the Ford logo from the car make screen.
Figure 9.4