Autel MaxiCheck EPB - Manual (Page 36)

34
Figure 5.21
5) If the vehicle supports readiness test of ―This Drive Cycle‖, a
screen of the following displays: (Figure 5.22)
Figure 5.22
6) Use the UP/DOWN scroll button for more PIDs if additional
information is available on more than one page. Or use the
LEFT/RIGHT scroll button to view PIDs in the previous/next
page.
7) Press the ESC button to return to Diagnostic Menu.
5.6. O2 Monitor Test
OBD2 regulations set by SAE require that relevant vehicles
monitor and tests on the oxygen (O2) sensors to identify problems
related to fuel efficiency and vehicle emissions. These tests are not
on-demand tests and they are done automatically when engine
operating conditions are within specified limits. These test results