Autel MaxiDiag Elite MD701 - Manual (Page 28)

26
In Auto Scan screen (Figure 5.16), pressing OK button will turn to
diagnostic operation. For more details, refer to 5.3 Diagnostic
Operation.
To exit the Auto Scan option, press ESC button. The scan tool will
display a message “Are you sure to quit?” to ask for your
confirmation. Select Yes to quit, and select No to cancel command.
5.2.2 Control Unit
Control Unit function will list down all the systems that might be
available on the vehicle for you to select to test. Select a system to
display the function menu and start testing.
Figure 5.18
NOTE: The actual systems displayed in the System Menu
screen may be different from Figure 5.18 due to various vehicle
configurations.
5.2.3 Vehicle Information
Vehicle Information function allows you to view vehicle-specific
information for Specifications, System Type and other Identification.
System Menu
1. ABS-Anti-Lock Brake/ Traction
Control Module
2. ACM-Audio Control Module
3. BEM-Body Electronic Module
4. FDIM-Front Display Interface
Module
5. HIM-HAVC Integrated Module
6. IPC-Instrument Panel Control