Autel MaxiDiag Elite MD701 User Manual
Page 79
77
2.
Select Active Test and a list of possible tests appear. The test
items in the list vary with different vehicles.
Figure 8.18
3.
Select a test and the tool will display an information screen as
“The 'apply electric parking brake' operation is used to test
the operation of the brake cables statically. If you start the
actuator test, you must wait for the component to stop
operating before starting another actuator test. Press 'OK'
to apply the electric parking brake or press 'Cancel' to go
back to the list of possible operation.” Select OK to continue
or Cancel to exit.
4.
The tool may display information during and after the test. The
information varies by vehicle.
Figure 8.19
5.
When the test is finished, there may be three results displaying
on the screen.
Apply electric parking brake
Listen to the noise of the
Electric motor!
OK
Active
1.Apply electric parking brake
2.Release electric parking brake