Autel MaxiDiag Elite MD701 User Manual
Page 76
74
If the job fails to finish, the tool will display a message to remind
user of a problem. After you exit the diagnosis program, please
repair the problem immediately.
Figure 8.11
C. Electric parking brake calibration
When both functions above have completed successfully, you
still need to calibrate the electric parking brake system.
This function is to check if the EPB is working correctly, which
should be performed after work has been completed on the EPB
or vehicle braking system. It will remove any air gap from the
brake pads and check the EPB pressure.
After you select this function, the tool will automatically work in
the following procedure.
Figure 8.12
Electric parking brake calibration
Activation in progress!
OK
Cable tensioning
Activation done, a problem
occurred during the operation.
Press any key to continue
OK