Autel MaxiDiag Elite MD701 - Manual (Page 33)

31
5.3.3 Live Data
Live Data function enables you to view the “real-time” live data,
including the information of values (volts, rpm, temperature, speed
etc.) and system status information (open loop, closed loop, fuel
system, etc.) generated by vehicle sensors, switches and actuators.
NOTE: If the vehicle must be driven in order to perform a
troubleshooting procedure, ALWAYS have a second person help
you. One person should drive the vehicle while the other person
observes the Scan Tool data. It is dangerous to drive and operate
the Scan Tool at the same time because a serious traffic accident
might be caused.
1) To view live data, use the UP/DOWN scroll button to select
Live Data from Function Menu screen (Figure 5.27), and press
OK button. The screen will show as below.
Figure 5.27

The number to the right of selected item indicates sequence of
this item.

If you want to select the item, press Select button.

To select all the items on the screen, press Select All button. To
clear all the selected items on the screen, press Clear All button.
2) Press the OK button to view the information.
………… .. Live Data
 MFF_RPM(Engine RPM)
1
□ MFF_SOAk(Engine Off Soak Time
Prior to Misfire)
 VEHICLE SPEED SENSOR
2
Select All Select Clear All