Envizen HR702 User Manual
Page 10
8
Setting up Home Roam TV
6-5. Menu Setup on Display Receiver
Press [MENU] key on the display receiver panel to go into the Menu Setup interface. The Receiver
screen will now display the following content. The users can select Brightness/Contrast/Saturation
through and keys as what you like, then select the appropriate values through and keys
according to the circumstances.
Demo Playback
The display receiver also includes a 60 seconds video clip about the introduction of Home Roam
TV
When the Transmitter Module is on the mode of Power ON, press "MENU" key on the display panel
to enter the Menu Setup interface. The receiver screen will now display the following content.
Then press /VOL+ on the display panel to start the video playback, and the video will be repeated
automatically until any key on the display panel pressed.
When the Transmitter Module is on the mode of Power OFF, press any key on the display panel to start
the video playback except the keys of /VOL+ and /VOL-, and the video will be repeated automatically
until any key on the display panel pressed except the keys of /VOL+ and /VOL-.
TM
.