Envizen HR702 - Manual (Page 7)

Setting up Home Roam TV
5
Tips:
a) You can also use the AV cable to connect the transmitter to all devices with AV outputs. You just
need to switch the different sources you wish via [TV] [AV] button on the receiver panel.
b) Use mini plug to RCA AV female cable adaptor with RCA to RCA cable, included in the package,
to connect [AV] inputs. Connect regular RCA to RCA AV cable to the female end of the adaptor.
TV or Set Box
View any source connected to the transmitter module as an extension of the electronic device: Cable /
set top box, TV, Blu-Ray player, DVD player, VCR or Media player. In this mode, you can operate the
Receiver by powering on/off, menu setup,volume controls and switching different channels on the Home
Roam TV Display Receiver.
6-1. HR TV Transmitter Module Connections
Connect Home Roam TV transmitter module input to the audio video (A/V) outputs of your home
electronic device ( cable box, TV, blu-ray, DVD, VCR or media player), using A/V cables provided.
There are two AV INPUTs: TV IN (TV/Cable or Dish Set Top Box) and AV combination input jack.
Select one or two AV INPUTs which you would like to connect. For example, connect your home
television, cable box from [AV OUT] into either Home Roam TRANSMITTER [TV IN] or [AV] inputs,
using the included RCA to RCA cable.
NOTE: Home Roam TV is ideally suited for connecting your cable / Dish Set top box as your TV set
does not have to be turned on in this mode. Please read the following picture.
2.Media Player
3.DVD or BD Player
1.VCR