Envizen HR702 - Manual (Page 3)

This symbol is intended to alert the user to the presence of important operating and maintenance
servicing instructions in the literature accompanying the appliance.
warning to avoid electric shock please ensure plug is inserted completely.
To prevent electric shock or fire hazard do not expose the unit to rain or moisture.
Warning To avoid electric shock or fire hazard,do not open the cabinet,refer servicing to
qualified person only.
Warning: for safety we advise that it is not allowed to watch video during driving!
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
Please read this safety & operation
manual before you install and use the
unit,and please follow the instruction.
Pay attention to warning and do follow
them.
Route the power cord so that it is not
likely to be walked on or pinched by
items placed upon or against them,
paying particular attention to the plugs,
receptacles,and the point where the
cord exists from the appliance.
Please disconnect the unit under these
conditions:Lightning,Rainstorm or you
won't use it for a long time,this can avoid
electric shock.
Do not overload wall outlets,extension
cords or convenience receptacles
beyond their capacity,since this can
result in fire or electric shock.
Power jack is used to disconnect the
unit and should be easy accessible
everytime.
Never place the unit near or over such
objects:for example,radiat or heat
register, stove or other heat sources
Unplug the unit from the wall outlet
before cleaning or polishing it.Do not
use liquid cleaners or aerosol cleaners,
use a cloth lightly dampened with water
for cleaning the exterior of the unit.
Never place heavy object on the unit.
Notice:
Keep safety utilization of electric power .
electrical wire of peripherals should
marked with safety label.and the wire
cannot be lose its security feature for
random replacement.following this can
should
avoid electric shock or fire hazard,in case
such accident happens,you
contact qualified technician.
The power requirement of this unit is
100~240VAC,50Hz/60Hz.
Check the connection reguarly.If any
rupture of failure in insulation,call for
a maintenance man to replace them.
To ensure reliable operation,and to
protect it from overheating,the unit
must be put in somewhere well ventilated
Do not place the unit on an unstable
object,the set may fall,causing serious
injury to a child or an adult,and serious
damage to the unit.
Never let any liquid spattered on the
unit.It might cause electric shock or fire
hazard.
Do not repair the unit yourself,opening
or removing the cover may expose you to
dangerous voltage or other hazards,
refer all servicing to qualified service
personnel.
(including amplifier).
Safety Disclaimer
1
To reduce the risk of the fire or injury to persons or damage to the product, please read the safety
precautions before use.
Do not place Home Roam TV on or near any hot surface, such as stereo amplifier, transformer, radiator,
etc. Also, do not place anything on the top of the Home Roam TV.