CHIEF XPAU Series - Manual (Page 11)

Installation Instructions XPAU
11
8. Wrap cables around cable hooks (K) as desired. (See
Figure 16)
Figure 16
Covers Installation
Front of Column
1. Insert tabs on one side of lower cover (D) into
corresponding slots on side of column assembly. (See
Figure 17)
2. Manipulate lower cover so that it fits within front cavity of
column assembly and insert tabs on other side of lower
cover into corresponding slots on side of column assembly.
(See Figure 17)
Figure 17
3. Use four #10-24 x 1/2” button head cap (X) or security (Y)
screws to secure lower cover (D) to front of column
assembly (F). (See Figure 18)
Figure 18
Back of Column
4. Insert tabs on one side of upper cover (E) into
corresponding slots on side of column assembly. (See
Figure 19)
5. Manipulate upper cover (E) so that it fits within front cavity
of column assembly and insert tabs on other side of upper
cover (E) into corresponding slots on side of column
assembly. (See Figure 19)
Figure 19
(K) x 2
8
1
1
2
(D)
(X) x 4
3
(Y) x 4
or
3
4
4
5
(E)