CHIEF XPAU Series - Manual (Page 9)

Installation Instructions XPAU
9
WARNING: Display may be very heavy! Ensure display
may be safely lifted and maneuvered as required to install on
cart. Failure to take adequate precautions can result in
serious personal injury or damage to equipment!
7. Position latches on interface uprights so that they are in the
“open” position. (See Figure 8)
8. Hang interface uprights (B) on head assembly. (See
Figure 8)
Figure 8
IMPORTANT ! : In order to ensure an even mount, install
uprights to be centered over column assembly. Do NOT
install both uprights to the same side of column
assembly! (See Figure 9)
Figure 9
9. Move latches on interface uprights to the “closed” position
to secure display to head assembly. (See Figure 10)
Figure 10
10. Snap four upright covers (A) onto uprights. (See Figure 11)
NOTE: Tabs on inside of covers (A) will snap directly into holes
on uprights to ensure a secure connection.
Figure 11
11. (Optional) Use padlocks (not provided) to secure uprights to
head assembly. (See Figure 11)
open position
7
7
8
8
head assembly
9
9
9
9
(column not shown for clarity)
(A) x 4 10
11
(B) x 2
(column not shown for clarity)