CHIEF XPAU Series - Manual (Page 13)

Installation Instructions XPAU
13
Pitch Adjustment
WARNING: Removing pitch adjustment screws when the
display is installed will result in the display falling from the
mount! Do NOT remove pitch adjustment screws completely
while the display is installed to the mount!
3. Loosen pitch adjustment screws to allow pitch to be
adjusted. (See Figure 24)
4. Adjust pitch as desired. (See Figure 24)
5. Tighten pitch adjustment screws to lock pitch position. (See
Figure 24)
Figure 24
Cart Use and Maintenance
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the XPAU up to (and
including) the display does not exceed 300 lbs (136 kg).
WARNING: RISK OF SERIOUS INJURY OR DEATH!
Placing a remote control or toy on the cart may encourage a
child to climb onto the cart causing the cart to tip over onto
the child. DO NOT place remote controls or toys on the cart!
WARNING: RISK OF SERIOUS INJURY OR DEATH!
Relocating audio and/or video equipment to the cart may
result in the cart collapsing or overturning onto a child. DO
NOT relocate audio and/or video equipment to the cart!
WARNING: CART CAN TIP OVER RESULTING IN
INJURY! Do not allow children under 16 to move cart. Only
adults should move this cart. Move cart slowly. Apply moving
force on narrow dimension. Never apply force at top - always
push toward the middle. Push, don’t pull cart. (See Figure 25)
NOTE: The XPAU cart has no user serviceable parts.
NOTE: The XPAU cart can support screen sizes up to a
maximum of 100" wide.
1. Always place cart on a level surface.
Figure 25
pitch adjustment
screws
3 5
(side view)
4
Push cart near
middle
Do NOT push
cart near top