CHIEF XPAU Series - Manual (Page 14)

XPAU Installation Instructions
14
2. Always lock the wheels when the cart is not moving.
3. Check and tighten the hex nuts on the casters occasionally.
(See Figure 26) These should be checked especially after
use on uneven ground.
Figure 26
Removing Display from Cart
1. Remove any padlocks from interface uprights if installed.
2. Position latches on interface uprights so that they are in the
“open” position. (See Figure 27)
WARNING: DISPLAYS MAY WEIGHT IN EXCESS OF 40
LBS! Always use two people and proper lifting techniques
when installing or positioning display on cart.
3. Carefully lift display from cart. (See Figure 27)
Figure 27
x 4
2
3
2 3
open position