Analog Way Saphyr - Manual (Page 20)

20
4.7.2 Video output
The Saphyr has one video output.
This video output contains:
- 3G/HD/SD-SDI (BNC),
- Analog SDTV (4 × BNC: Composite, YC, YUV, RGBS).
Please see the formats available on the output:
Please see the output formats of the monitoring output:
Please note that SDTV and EDTV are not available on the standard output but only on the video output module.
4.7.2 Video output
Output Type Format Signal
Analog Computer/Video Ouput
HDTV
Computer
Analog HDTV
Analog Computer
DVI-I Output
HDTV
Computer
Digital HDTV
Digital Computer
Output Type Format Signal
Video Y/C Output SDTV Analog SDTV
Video Y Pb Pr Output SDTV Analog SDTV
Video RGBSTTL Output SDTV Analog SDTV
SD-HD-3G-SDI Output
SDTV
HDTV
Digital SDTV
Digital HDTV
A standard RS232 interface is available through a DB9 female connector:
- It permits controlling the device
- It permits updating the device
Data Rate: 1200 to 115200 Bauds, 8 data bits, 1 stop bit, no parity bit, no flow control by default.
DTR & RTS needed for firmware upgrade.
4.8 Communication specifications
4.8.1 Serial interface