10 working with frames/logos – Analog Way Saphyr User Manual
Page 69
Advertising
69
8.3.10 Working with frames/logos
8.3.10 Working with frames/logos
The frame/logo can be memorized from Output #1 or #2. To record a frame/logo, please
refer to the chapter:
8.2.14 Capturing frames and 8.2.20 Capturing logos
in the Mixer mode.
To use a frame/logo, refer to “Working with frame/logo”.
As a source, each frame/logo can be used by both outputs, you just have to select the correct matrix# button
first.
Advertising