Analog Way Saphyr - Manual (Page 66)

66
8.3.6 Working with native Matrix mode
NOTE: The output status can provide you all information about the output in real time. This feature is parti-
cularly needed when HDCP is used thanks to the HDCP status.
All changes have to be validated by pressing the Ok button in order to be saved
Video Out
In native Matrix mode, the menu “connection mode” allows you to choose recording Output #1 or Output #2.
In Matrix mode, the SDI output embeds audio from Output #1 and Output #2.
8.3.6 Working with native Matrix mode
To activate the native Matrix mode:
Mode Menu > Matrix mode Menu
You’ll find all menus from the Mixer mode in the main menu except some specific matrix function added.
To work with native Matrix mode, you have to use the Matrix # buttons first.
For instance, if you want to put the fame #1 on the Output #1 and the live source #3 on the output #2:
Press Matrix #1 button > Press Frame button > Press input #1
Press Matrix #2 button > Press Layer A button > Press input #3
Press TAKE to view the result on both screens
Don’t forget to press the correct Matrix # button before pressing the Layer selection button, in order to be
sure doing the manipulation on the correct output.
8.3.7 Working with Cut, Fade or Transitions
All the transitions (Cut, Fade or Transitions) are available in the native Matrix mode. Although the Matrix
mode is activated, you will be able to perform powerful transition effects seamlessly. It can depend on your
configuration.
Display mode Presentation Availability
Output #1
Output #1 & #2 side by side
YES
Matrix mode only
Matrix mode only
Matrix mode only
OUT #1
OUT #1
OUT #1
Output #2
Output #1 & #2 Top and Bottom
OUT #2
OUT #2
OUT #2
Menu > Video Out > Connection > Output #1
Menu > Video Out > Connection > Output Titled
Horizontally
Menu > Video Out > Connection > Output Titled
Vertically
Menu > Video Out > Connection > Output #2