Analog Way Saphyr - Manual (Page 55)

55
8.2.12 Layer adjustment menu
• TAKE 2 - shot: Case #2
- There are enough scalers for making a transition
- All inputs are locked on to scalers before the TAKE
- There are no constraints for closing during the TAKE
- All the necessary closing transitions are performed to free occupied scalers and then the Saphyr performs
all openings (for example, when a frame or a logo needs to be changed, except with Cut effect).
• TAKE sequenced - shot: Case #3
- There are not enough scalers for making a transition
- All inputs are not locked on to scalers
- All the necessary closing transitions are performed to free occupied scalers. The Saphyr locks on to new
sources and performs all openings.
8.2.12 Layer adjustment menu
• To have access to the layer adjustment menu, a source has to be affected to your layer:
Press Layer# button > Press source #
• Once a source is attached to layer, you can have access to the layer adjustment menu:
Press Layer# button
Press TAKE to view the result on the Program screen
• To adjust layers, there is a shortcut on a front panel too:
Press Layer# button > Press ADJ button
8.2.13 Layers with transitions & borders
Transitions
All the settings are available in the Layer menu after pressing the selected layer.
The transition effects have some shortcuts on the front panel too.
To use it: Press the selected Layer # > Press the Cut, Fade, User #1, #3 or User #2, #4 button
The effect will be immediately attached to the selected layer (Preview).
Concerning the User 1, 3 and User 2, 4 button, they have to be set up before in the Control menu > Func-
tions > Front panel > Prog. Keys
- CUT: duration time can be set to delay the cut effect,
- FADE:
• Adjustable pre-timed fades or manual transition with T-Bar,
• Fade between any input, computer or video,
• Adjustable cross-fading duration,
A
B
B
A
B
A
Program
Preview
Program
Preview