Analog Way Saphyr User Manual
Page 35
35
Under the ASPECT RATIO section:
- ASPECT IN:
forces a particular aspect ratio for the source. (5:4, 4:3, etc). This setting has no effect when set
to native,
- PREDEFINED CROP:
choose a specific cropped ratio if you use a source with black bands on top/bottom or
left/right,
- ASPECT OUT:
define the way the image will be displayed into a layer (full screen, centered, cropped or 1:1),
- OVERSCAN:
choose to apply or not a predefined zoom on the image (use with video signal).
Next settings available on the ASPECT tab are:
- CROP:
use the Top, Bottom, Left and Right values to
crop your input.
The next tab is the USER FORMAT:
In this tab, you can explicitly define the input format. The input
format is automatically detected by the Saphyr but you can change
it or force it. The available formats are close to the current one, in
terms of lines. This is only available for analog computer formats.
Keying Feature
With the keying feature, you will be able to key easily a color space
or a specific luma on an input.
The device offers an individual keying for each input. Into the input settings, find the keying menu:
You have 2 ways of using the keying:
- COLORKILLER:
classic color keyer removing a specific color space defined by user,
- LUMAKILLER:
luma keyer removing a specific lumanance level range.
7.2.7 Intput management