Analog Way Saphyr - Manual (Page 49)

49
8.1.1 Menu navigation
8. OPERATING THROUGH THE FRONT PANEL
8.1 Front panel
To access the Saphyr menu, press the EXIT/MENU button in the control
section. To highlight items in the menu which will appear on the VFD
screen, turn the scroll knob left or right to the desired menu item. When
you have reached the desired menu item, press the ENTER button in
the control section to access that menu function. Pressing the ENTER
button when a selection has been made sets the value to that selection
in the Saphyr memory. When all settings have been made, press the
EXIT/MENU button to exit sub-menus and return to the main menu.
Pressing the MENU button in the menu section of the Saphyr, will display and give you access to the following
items on the menu VFD screen:
- MODE: select to choose which mode the Saphyr will work in (Mixer/Matrix mode),
- OUTPUT 1: select to set the output types and resolutions of Output #1,
- OUTPUT 2: select to set the output types and resolutions of Output #2,
- VIDEO OUT: select to configure Video output card settings,
- INPUT: select to configure the 10 individual input types and resolutions,
- PRESET: select to store and use presets,
- IMAGE*: select to change source image settings of an input,
- KEYING/TITLING*: select to access keying and titling controls and parameters when video layer is selected,
- SCREEN: setup your background color and your Quick Frame,
- LAYER*: select to adjust layer size, position, border, transparency or transitions,
- FRAMES/LOGOS: select to store (record), use and manage logos and frames into the Saphyr,
- AUDIO: select to access all audio input and output parameters,
- OSD SETTINGS: select to display OSD,
- CONTROL: select to access device software information, LAN settings, reset factory settings, and other user
oriented functions.
* These items are only displayed if a valid input is assigned to the current layer.
The Saphyr offers 2 modes to work from: the Mixer mode and the Matrix mode which turns your Saphyr into
a true 10 x 2 scaled matrix with numerous effects and PIPs and logos.
To choose which mode the Saphyr will operate in, press the EXIT/MENU button and select mode in the menu
by rotating the scroll knob. Then press the ENTER button to enter the MODE sub-menu. Select the desired
mode by rotating the scroll knob, and press the ENTER button to confirm your choice. Press the EXIT/MENU
button to return to the main menu.
8.1.1 Menu navigation
8.1.2 Home menu
8.1.3 Operating modes
Simply selecting a menu item will not set it to that value. Be sure to press the ENTER button when
parametering the menu items or to push the scroll knob.