Analog Way Saphyr - Manual (Page 67)

67
8.3.8 Working with presets in Matrix mode
The Saphyr has 4 scalers, to understand how your effect will be performed, you need to know how many
scalers are used on your outputs. Don’t forget that you always need one free scaler to perform seamless
transitions.
Example:
1 layer on each output > 2 scalers used > 2 seamless transitions
2 layers on each output > 4 scalers used > no seamless transition (ie: fade through black)
The frame and the logos are not considered as live layers and are not counted as using a scaler.
8.3.8 Working with presets in Matrix mode
In Matrix mode, you will find a new menu into Preset menu called “Preset management”. This will help you
to define what kind of preset you want to save:
- BOTH OUTPUT: preset saved for both outputs,
- CURRENT OUTPUT: preset saved only for the current output,
- OUTPUT 1: preset saved only for output #1,
- OUTPUT 2: preset saved only for output #2.
8.3.9 Working with Mirror modes
The Mirror Matrix mode is a specific Matrix mode where the output #2 will be the perfect mirror copy of the
output #1. In that way, each settings apply to output #1 will be performed on the output #2 too.
Mode Menu > Matrix mode Menu
Using the Matrix mode, several configurations are available, the simple mode and the mirror mode.
1. No Copy: this mode is the standard Matrix mode, output #1 and #2 are independent.
2. Clone mode: Outputs #1 and #2 will be the same. All changes on output #1 will be affected to output #2.
Layers will have the same position and size.
OUTPUT #1 OUTPUT #2
OUTPUT #1 OUTPUT #1 OUTPUT #2 OUTPUT #2
Using the Mirror mode: to use the mirror mode, simply select the Matrix mode throught the main menu,
then the mirror mode can be activated layer by layer thanks to the layers menu. Select the chosen layer and
go in the layer menu, then select the “Layer Copy Mode” menu. There are several mirror positioning options: