Net dvr, B)display problems – eLine Technology ECO3 User Manual User Manual
Page 69
69
Net DVR
(B)Display Problems
01: Why there is nothing displayed on the monitor or the display keeps shaking?
01: 1.Check if the power is on or not. If the power is on, the power light at the front panel should be on. 2.Check the display mode. Refer
to VGA/CVBS display switch from the user manual.
02: Why my DVR display images that seems to be interfered, and like water wave shape?
02: 1.Please check if the video cable has well connected. 2. Check if there are strong electricity c urrent around the video cable. Please don’t
put video cable together with electricity cables to avoid interfering. 3.Please check if the DVR cas e is well grounded.
05: Why my remoter doesn’t work?
05: 1.Please check if the IR indicator light on the front panel flashes when you make operations with the buttons. If not, please check whether
the remote control has run out of battery, or the remote control has been damaged. 2. Check if the front panel is in lock up status. If so, press
Login/Lock button and input power password to unlock. 3. Please check if the host software locks the operation. If yes, please input user
name, password to login, so to make IR remoter control work.
06: Why system halts at some certain time?
06: In case system halts at some certain time, for example, around 7:30am, please check your electri city system. This problem is mostly
happened in factories, when at around 7:30, all machines start and cause power supply in a short tem porarily. Try to make the DVR not
connect to the same circuit as the industrial machines.
04: Why does my system restart after self-check?
04: 1.Check the hard disks if they are in FAT32 file format, if not, change to FAT32. 2. Check Color System setting in Record Parameter
menu. In case this setting is PAL, while present video input is in NTSC format, which will cause sys tem restart. 3. Please unplug the network
cable, to see whether DVRs run normally, since there are serious problems of the network which may a lso cause the host to restart
repeatedly.