eLine Technology ECO3 User Manual - Manual (Page 70)

70
User Manual
Only connect the case to ground by the screw on the back panel, while no other points connect to ground. 4.Please check camera, monitor
and video cables if they are aging.
03: Why both the live display image and playback image are not showing the true color?
03: Please check if you have set the parameters well. (Please refer to chapter 4.2.1 for details)
04: Why my DVR displays distorted images on VGA monitor or cannot make full screen display?
04: 1.Please check if your VGA monitor is well set up. 2. Change your VGA monitor settings till make it full screen.
05: Why my DVR system shows disordered color?
05: 1.Please check you VGA data line, as well as connection condition between DVR to VGA monitor. 2. Check if the DVR system has
overheat.
06: I started my system seeming to be successfull, but there was a certain channel displaying nothin g, neither caption. Why?
06: Please make restore to factory default settings.
07: Why it displays mosaics when playback?
07: 1.Check the recording parameter setting. If the recording parameter is set too low, it can influ ence the image quality and cause mosaics.
2.If bad sectors exist in the HDD, it might cause mosaics when playback. Users need to check HDD.
(C)Client manager and remote functions
01: Why my windows system refused my installing client manager software?
01: You may haven’t installed DirectX8.1 or above. Please make sure you have installed before instal lation.