6 ptz control, 2 full screen mode, 3 stop all cameras’ in live preview – eLine Technology iVMS-2000 V2.0.2 User Manual

Page 32: 4 enable manual record on all cameras, 5 start auto switch, 6 enable/disable live audio

Advertising
background image

iVMS-2000 User Manual


27

3.5.2 Full Screen Mode

: Click the button to enter full screen mode, the button appears

after clicked.

Click the button again to exit full screen mode.

3.5.3 Stop All Cameras’ in Live Preview

: Click the button to close all active windows.

3.5.4 Enable Manual Record on All Cameras

:

Start Manual Recording for all cameras which will not stop until the button is

pressed again. The button looks like this

when recording is in progress.

3.5.5 Start Auto Switch

:

Click the button to start auto switching by cameras or groups. Select switch mode

by pressing

.

Switch by cameras: Start auto switching by cameras according to current live preview

layout. Switching duration can be set in

6.1 General Setting

.

Switch by groups: See

3.3.2 Cycle live preview of group

. This provides the same

functionality as cycle live preview of group.

The button looks like this

when switching is active. Press the button again to exit.

3.5.6 Enable/Disable Live Audio

: Press the button to enable live audio. When pressed the button should change to

;

: After enabling live audio, you can adjust volume by using the slider.

3.6 PTZ Control

Press on

in main console to open PTZ control

panel as shown in Figure 3-20.

Advertising