eLine Technology iVMS-2000 V2.0.2 - Manual (Page 70)

iVMS-2000 User Manual
65
Figure 5-7 Hot spot
(2)Delete hot spot
Select a hop spot in the Map Preview Area in edit state. Click [Delete selected]
to pop-up the dialog. (Figure 5-8) Click [OK] to delete the hot spot or click
[Cancel] to cancel the delete operation.
Figure 5-8 Tips: Delete hot spot
(3)Modify hot spot
Right click on the hot spot in edit state to pop-up the right button menu .
Click [Property] to pop-up the dialog Figure 5-7. Change the name of the hot spot in the
[Name] bar. Re-select the associated channel in [Associate] camera list. Click [OK] to
modify the hot spot or click [Cancel] to cancel the modify operation.
Notes:
Double click the added hot spot in Map Preview Area in non-editing state, it will
pop-up tips that displays the associated channel to this hot spot.
The hot spot icon will be lighted when there is an alarm in the associated hot spot
after the linkage alarm configuration is finished. (Please refer to “6.6.1 Add Alarm
Linkage” for detail)
5.1.3 Add Map Link Operation
Map Link: Shortcuts to link maps together (include non –subclass map).