eLine Technology iVMS-2000 V2.0.2 - Manual (Page 35)

iVMS-2000 User Manual
30
(4) Recall presets added
Select the preset you want to recall in presets list and click button to recall the
preset. You can do that by double clicking on the preset number.
Note: You can also achieve preset function via right-click menu.
(5) Right-click Menu
Click the right mouse button in presets list and the right-click menu will pop up, as
shown in Figure 3-25. In addition to above operations, the menu contains a “disable”
function. You cannot recall a disabled preset. The status bar will display “Forbidden” after
the corresponding preset has been disabled.
Figure 3-25 Right-click Menu
3.6.2 Patrol
Patrol can make it more convenient to switch between several presets.
Click “Patrol” to enter patrol configuration area as shown in Figure 3-26.
Figure 3-26 Patrol operating area
(1) Add patrol sequence
Click button and prompt Config patrol box as shown in Figure 3-27, input
patrol name and select presets in the drop-down list which you want to add to the patrol.
Then input the dwell time to stay, click “Add” to complete adding preset in the patrol.
Note:

Each patrol should have a unique name.
 You can remove presets from a patrol by selecting one preset and clicking
button “Delete”.
(2) Modify patrol sequence.
Click button and the patrol configuration dialog will prompt as shown in Figure
3-27. Users could rename a patrol as well add presets to the patrol or delete presets from
the patrol by clicking corresponding buttons in patrol configuration dialog. Click button
“OK” to save changes.
Note: You can’t assign the patrol a name which is already in use.