eLine Technology iVMS-2000 V2.0.2 - Manual (Page 92)

iVMS-2000 User Manual
87
6.6 Alarm Actions
Click [Alarm] and enter alarm linkage configuration interface (Figure 6-25). Users can
configure link events for motion detection, video loss, video tamper and exception alarm of
each camera.
Figure 6-25 Alarm Linkage Configuration Interface
6.6.1 Add Alarm Actions
All the motion and video tamper alarm has been automatically a dded after the camera is
added into the system, and I/O alarm will also be automatically added after adding alarm box
into the system. Exception alarm linkage will not be added automatically, and users can add
linkage for exception alarm by clicking [Add] and configure in the Add Alarm dialog box
(Figure 6-26).