eLine Technology iVMS-2000 V2.0.2 - Manual (Page 59)

iVMS-2000 User Manual
54
4.5 Section Playback
Section Playback: In accordance with set start and end time, average the single-channel
record to 4/9/16 sections by the record time. Then playback one channel record data by the
segment at the same time.
Click [Section] in the [Button Area] to enter the section playback interface.
(Figure 4-25)
Figure 4-25 Section Playback Interface
Steps:
1. Select channel in the [Camera] combo box (the channel being synchronizing);
2. Set the start time and the end time, and select the number of sections (4/9/16).
3. Click [Play] button to start section playback. The section information is displayed in
the left [Section Info]. Split screen automatically adjust according to the number of
sections.
4. The function of the control bar button is the same as in synchronous playback.
5. Click [Close] to exit Section Playback.
Note: Section playback is non-synchronous play mode. When operate the time bar
by clicking the mouse left button, the control works only to the section that the
mouse operates. When select a playback window, it can display the selected status
of the section and display the current play time in the time bar.
5
1
2
3
4