eLine Technology iVMS-2000 V2.0.2 - Manual (Page 72)

iVMS-2000 User Manual
67
Click the [Add alarm spot] button in edit state to pop-up the dialog.
(Figure 5-10) Input the name of hop spot in the [Name] bar and select the associated
alarm input port in [Associate] port list (See 6.7.3 Alarm box and alarm in/out
configuration for detail). Click [OK] to add the alarm spot.
Figure 5-10 Add alarm spot
(1)Delete alarm spot
Select an alarm spot in Map Preview Area in edit state. Click [Delete selected]
to pop-up tips (Figure 5.9). Click [OK] to delete the alarm spot or click
[Cancel] to cancel delete operation.
(2)Modify alarm spot
Right click on the alarm spot in edit state to pop-up the right button menu .
Click [Property] to pop-up the dialog Figure 5-10. Change the name of the alarm spot
in the [Name] bar. Re-select the associated alarm input port in [Associate] port list.
Click [OK] to modify the alarm spot or click [Cancel] to cancel the modify operation.
Note: The alarm spot icon will be lighted when there is an alarm input in the
associated alarm input spot after the linkage alarm configuration is finished. (See
6.7.3 Alarm Box Configuratio n for detail)
5.1.5 Map Preview Operations
(1)Drag the map
If the map display area can’t display the whole map, you can drag the map inside the
preview area.
(2)Zoom in/out and move