Options, Using the op-02 sla battery – A&D Super Wash Down Scales SW-150KL User Manual

Page 27

Advertising
background image

25

M4 screw (10 pcs)

Battery NP4-6

“-” (BLACK) wire

“-” terminal (BLACK)

“+” (RED) wire

Display rear cover

“+” terminal (RED)

Display

13. OPTIONS

13.1. Using the OP-02 SLA battery

‰

The scale can be operated with a sealed lead acid (SLA) battery, available as an

option.

‰

The scale (with no other options) can be operated continuously for about 90 hours

with a fully charged battery.

‰

The battery will take about 15 hours to be fully charged.

‰

The battery life will vary depending on how the scale is used, the ambient temperature

and so on.

‰

A battery, NP4-6 (6V, 4Ah), manufactured by YUASA, is commercially available.

Caution

There will be risk of leakage, fire or explosion if the battery is connected

improperly or replaced with the incorrect type.

Dispose of a used battery according to the local laws and regulations.
Do not handle the battery with wet hands. Take much care not to get the battery wet.
Do not install the battery under high temperatures and high humidity.

13.1.1. Installing the battery


























Advertising