A&D Super Wash Down Scales SW-150KL User Manual
Page 29
Advertising
27
13.2. OP-03 RS-232C / RELAY OUTPUT
This interface allows the SW scale to be connected to an AD-8121 printer or a
personal computer, and the relay outputs for comparator results are also available.
When OP-03 is installed, the dust-tight and water-tight performance of the scale will
be degraded.
OP-03 includes an interface board, two connector cables (7 and 10 pins), two cable
glands and two screws (M3x8).
13.2.1. Installing OP-03
1.LOLO
2.LO
3.OK
4.HI
5.HIHI
6.COM
7.SHLD
1.RXD
2.TXD
3.DSR
4.SG
5.SHLD
6 mm
(AWG 26~16)
Terminal block
M4 screw (10 pcs)
Display rear cover
Cable glands
Interface board
M3x8 screws
Peel
Connector cable
To the
external device
Advertising
This manual is related to the following products: