A&D Super Wash Down Scales SW-150KL - Manual (Page 42)

40
MODEL SW-60KM SW-150KM SW-60KL SW-150Kl
Weighing capacity 60 150 60 150
0.02 0.05 0.02 0.05
0.01 * 0.02 * 0.01 * 0.02 *
kg
Minimum display
0.005 0.01 0.001 0.002
Weighing capacity 130 330 130 330
0.05 0.1 0.05 0.1
0.02* 0.05* 0.02* 0.05*
lb
Minimum display
0.01 0.02 0.01 0.02
Weighing capacity 2100 5200 2100 5200
1 2 1 2
0.5* 1* 0.5* 1*
oz
Minimum display
0.2 0.5 0.2 0.5
Weighing capacity 130 33 130 33
Ib-oz
Minimum display 1 1 1 1
Number of samples 5 (can be changed to 10, 20, 50 or 100) pieces
Maximum count 120,000 pcs 150,000 pcs 120,000 pcs 150,000 pcs
Minimum unit weight 0.0005 kg 0.001 kg 0.0005 kg 0.001 kg
Repeatability
(Std. deviation)
0.01 kg 0.02 kg 0.01 kg 0.02 kg
Linearity ±0.02 kg ±0. 05 kg ±0.02 kg ±0. 05 kg
Sensitivity drift ±20 ppm / °C (5°C to 35°C / 41°F to 95°F)
Display
Weight display: 7 segment LED display (character height 14.6 mm)
Comparison results: red / yellow / green / yellow / red LED
Display update 10 times per second
Operating conditions -10°C to 40°C / 14°F to 104°F
Power supply
AC main (100V to 240V)
or
optional SLA battery (continuous operation of 90 hours
depending on how the scale is used)
Weighing pan size 300 x 380 mm / 11.8 x 15.0 in. 390 x 530 mm / 15.4 x 20.9 in.
Dimensions
(Models with a display pole) 300 (W) x 601 (D) x 722.5 (H) mm
11.8 (W) x 23.7 (D) x 28.4 (H) in.
390 (W) x 751 (D) x 722.5 (H) mm
15.4 (W) x 29.6 (D) x 28.4 (H) in.
Mass (approximately)
(Models with a display pole)
13.0 kg / 28.7 Ib 16.2 kg / 35.7 Ib
Calibration weight
(factory setting)
60 kg
120 lb
150 kg
300 lb
60 kg
120 lb
150 kg
300 lb
* Factory setting
Options
OP-02
SAL Sealed Lead Acid battery (YUASA NP4-6 recommended)
OP-03 RS-232C / Relay output
OP-04 RS-422 / 485
Note: The options, OP-03 and OP-04, can not be used at the same time.