EXP Computer ThinCD E series for CDE-2440(PCMCIA Model), CDE-2450(USB Model), CDE-2465(Parallel Model) - Manual (Page 16)

16
Software Installation for PCMCIA Model
Windows 98
1. After you have plugged the PC card into your notebook, power on
your PC. The Add New Hardware Wizard will be displayed.
2. Click Next in the next two screens to get to the screen shown
below.
3. Insert the device driver diskette into your floppy drive.
4. Check Floppy disk drive and Specify a location. Make sure
A:\win95 is displayed as below.
5. Click Next and then Finish to complete the installation process.