EXP Computer ThinCD E series for CDE-2440(PCMCIA Model), CDE-2450(USB Model), CDE-2465(Parallel Model) - Manual (Page 7)

7
Part Names & Functions
The front and rear panels of your ThinCD drive may look slightly different
from the figures below. However, The important parts and functions are the
same regardless of their locations.
FRONT PANEL
1. Eject button:
Press this button to eject the tray.
2. Access LED:
This LED will blink when the drive is accessing the disc.
3. Emergency Hole:
Insert a pin shaped item to manually eject the tray when the drive is
powered off.
4. Power LED:
This LED will light when power is on.
REAR PANEL
1. Power Button:
Press the button to manually power on/off the drive when it is powered
by an AC adapter.
2. DC in Jack:
This jack connects to the AC adapter.
3. Power Source Switch:
This switch is used to select the power source. When the switch is set to
“PC”, then PCMCIA power direct is selected. When it is set to “DC”, an
AC adapter is required to power the CD-ROM.
4. Interface Connector:
Connect the CD-ROM drive to the USB, PCMCIA or Parallel interface.