EXP Computer ThinCD E series for CDE-2440(PCMCIA Model), CDE-2450(USB Model), CDE-2465(Parallel Model) - Manual (Page 23)

23
7. Click Finish to complete the installation procedure.
Windows NT
1. Once you have connected the Parallel cable to your PC and the
ThinCD drive, power ON your PC.
2. Pull up the Start menu, select Settings, then click Control Panel.
3. Double-click the SCSI Adapter icon.
4. Click the Drivers tab. Make sure IDE CD-ROM ATAPI…is selected
and click Add, as shown below.
5. Once in the Install Driver window, click Have Disk as shown below.