EXP Computer ThinCD E series for CDE-2440(PCMCIA Model), CDE-2450(USB Model), CDE-2465(Parallel Model) - Manual (Page 27)

27
Note: If your AUTOEXEC.BAT file loads a menu program such as
DOSSHELL or Windows, you have to add the above line to start
your menu program. Otherwise, MSCDEX will not have a chance
to load before your menu program begins.
The example above shows the default setting. The /D: switch indicates
the device name. It MUST be the same name as you specified by the
/D: switch of EXPCDI.EXE in your CONFIG.SYS file. The /M: switch
indicates how much memory to allocate for caching information on the
CD-ROM. The default /M:4 caches 8KB.
For more information about the switches of MSCDEX, please type “help
MSCDEX” at the DOS prompt.
Now, reboot your computer to activate the CD-ROM drive.
SOFTWARE INSTALLATION FOR DOS
Parallel Port Model:
Make sure that your computer has an IBM-compatible parallel (printer) port
and DOS 3.1 or above.
1. Follow the instructions in the HARDWARE INSTALLATION section.
2. Place your TransCD installation diskette into the floppy drive. (Open a
“DOS prompt” if you are in the Windows environment.)
If the floppy drive is the A drive, enter
a:\dos\tcd
3. Perform option 1, "Install", from the TransCD Utility Main Menu.
******** TransCD Utility Main Menu ********
1. Install TransCD Software
2. Un-install TransCD Software