EXP Computer ThinCD E series for CDE-2440(PCMCIA Model), CDE-2450(USB Model), CDE-2465(Parallel Model) - Manual (Page 6)

6
Condensation can form on the lens if the CD-ROM drive is moved from a
cold temperature to a warmer environment. This can result in the lens
inability to properly read the disc. If this occurs, remove the disc and
leave the power on. After one hour, reinsert the disc and try again.
Do not expose the disc to the direct sunlight. Do not store the disc in a
room with high temperature or high humidity.
To avoid dust, scratches, bending, etc., always store the disc in its case.
Use a soft and dry cloth in a circular motion to wipe the disc. Do not
use benzine, record cleaner, static electricity prevention fluid, or any
other liquid as it may damage the disc.
ý
Ÿ
Do not bend the disc.
ý
Ÿ
Do not shake or subject
to intense vibration.
ý
Ÿ
Do not put the drive in
a place subject to weight
and pressure.
ý
Ÿ
Keep the drive away
from the edge of the
desk or table
Ÿ
Handle the disc by the
edges as much as
possible.
ý
Ÿ
Do not touch the signal
side of the disc. Do not
attach labels to the disc.