EXP Computer ThinCD E series for CDE-2440(PCMCIA Model), CDE-2450(USB Model), CDE-2465(Parallel Model) - Manual (Page 21)

21
2. The Found New Hardware will now install the default PCMCIA
IDE/ATAPI Controller driver.
3. The ThinCD is now installing.
4. Once the installation is complete go to your desktop. Double-click on
My Computer, you should now see another CD-ROM drive displayed.
Software Installation for the Parallel Model
Windows 95/98
1. Once you have connected the Parallel cable to your PC and the
ThinCD drive, power ON your PC.
2. Go to your desktop and double-click on the My Computer icon. Now
double-click the Control Panel icon, and then the Add New
Hardware icon. Click Next to begin the installation.