EXP Computer ThinCD E series for CDE-2440(PCMCIA Model), CDE-2450(USB Model), CDE-2465(Parallel Model) - Manual (Page 28)

28
3. Audio CD Utility
4. Print TCD.EXE version number
5. Re-boot system
6. List all TransCD devices
7. List all FIT parallel devices
8. Reset CD-ROM drive
0. Exit
Enter menu selection >> 1
4. Follow the instructions on the screen. For the quickest install, press
ENTER to use drive C, press Y and ENTER to use default, and then
remove the installation diskette and press Y and ENTER to re-boot the
PC.
Most CD-ROM programs require a minimum of a 286 processor with MS-
DOS 3.1 or MS-WINDOW 3.1, 640K RAM, and an EGA/VGA video card.
Refer to the side of the CD-ROM package for program requirements, and
enjoy!
Access TransCD without Software Installation
(Dynamic loading of the TransCD driver)
This method of Dynamically Loading the TransCD driver offers a
temporary install of the TransCD driver. It will not modify CONFIG.SYS
and AUTOEXEC.BAT files. The driver is loaded dynamically. When the
system is shut off, the driver is gone.
1. Place your TransCD installation diskette into the floppy drive.
2. Select the floppy drive by typing floppy drive letter. For example:
A: change directory to \dos
At the floppy drive prompt type TCDGO. This will then install the TransCD
driver.