EXP Computer ThinCD E series for CDE-2440(PCMCIA Model), CDE-2450(USB Model), CDE-2465(Parallel Model) - Manual (Page 18)

18
Windows 95
1. After you’ve plugged the PC card into your PC, power on your PC.
The below screen will appear. (For Windows 95 version 4.00.950 or
4.00.95a.)
2. Select Driver from disk… and click OK.
3. Insert the device driver diskette into your floppy drive.
4. Specify the directory as A:\ or A:\win95 and click OK.
5. All other remaining installations will then proceed automatically.
Windows NT
Before you begin:
• Power on your PC
• Make sure that Windows NT is version 3.51 or higher and installed.
• Since Windows NT does not support the Hot Insert/Remove
feature, the ThinCD should be connected to your PC prior to
starting Windows NT. Likewise, don’t remove the ThinCD before
shutting down Windows NT.