Burkert Type 8791 - Manual (Page 23)

23
Attachment and assembly
→
Assemble the multi-part assembly bridge* suitable for the
actuator.
→
Attach the assembly bridge to the positioner using 4 cheese-
head screws
③
and circlips
④
. (see “Fig. 13”).
③
④
* The assembly bridge consists of 4 parts
which can be adjusted to the actuator by
varying the arrangement.
①
Fig. 13: Attach assembly bridge (schematic representation)
→
Place positioner with assembly bridge on the rotary actuator and
attach (see “Fig. 14”).
Fig. 14: Rotary actuator attachment
english
Type 8791