Type 8792/8793, Pneumatic connection – Burkert Type 8798 User Manual
Page 29
29
Fluid Installation
9.4.
pneumatic connection
9.4.1. pneumatic connection of the remote
sensor with internal air supply (Type
2103, 2300 and 2301)
Danger!
risk of injury from high pressure!
• Before dismounting pneumatic lines and valves, turn off the
pressure and vent the lines.
Connection
label: 1
Connection
“Blanked off
internally,
not used”
Connection
label: 3
1
Fig. 30: Pneumatic connection with internal air supply
9.2.
installing the process Valve
Thread type and dimensions can be found in the corresponding data
sheet.
→
Connect the valve according to the operating instructions for the
valve.
9.3.
installation of position controller
Type 8791, Type 8792/8793
→
Connect the position controller according to the operating
instructions of Type 8791 or Type 8792/8793.
English
Type 8798