Burkert Type 8798 - Manual (Page 6)

6
Authorized use
Warning!
general hazardous situations.
To prevent injury, ensure that:
• Do not supply the medium connectors of the system with
aggressive or flammable media.
• Do not supply the medium connectors with any liquids.
• Do not physically stress the housing (e.g. by placing objects on
it or standing on it).
• Do not make any external modifications to the device housings.
Do not paint the housing parts or screws.
• the system cannot be activated unintentionally.
• Installation and repair work may be carried out by authorized
technicians only and with the appropriate tools.
• The device may be operated only when in perfect condition and
in consideration of the operating instructions.
• After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
• The general rules of technology apply to application planning
and operation of the device.
note!
electrostatic sensitive components / modules!
The device contains electronic components, which react sensi-
tively to electrostatic discharge (ESD). Contact with electrostati-
cally charged persons or objects is hazardous to these compo-
nents. In the worst case scenario, they will be destroyed immedi-
ately or will fail after start-up.
• Observe the requirements in accordance with EN 61340-5-1
and 5-2 to minimize or avoid the possibility of damage caused
by sudden electrostatic discharge!
• Also, ensure that you do not touch electronic components when
the power supply voltage is present!
The Remote Sensor Type 8798 was developed with due
consideration given to the accepted safety rules and is
state-of-the-art. Nevertheless, dangerous situations may
occur.
Failure to observe this operating manual and its operating instructions
as well as unauthorized tampering with the device release us from
any liability and also invalidate the warranty covering the devices
and accessories!
English
Type 8798