Burkert Type 8056 - Manual (Page 18)

SE56
18
Functions can be accessed by the keyboard in two different ways:
‰ The Quick start menu makes possible to access directly a range of principal
functions for setting the scale reading and display characteristics of the sensor
Quick start menu can be enabled by function 8.4 (menu display)
‰ Through the Main menu it is possible to access functions with the access code
level 2. These control the sensor’s monitoring, data processing, input/output as
well further display options.
The following example shows how to change the Full scale by Quick Start menu; the
following example illustrates how to change the function by the Main menu.
The transmitter configuration menu can be accessed in two different ways:
1) by ISOCON interface
2) by keyboard of transmitter
Isocon is a Windows ® software
that allows to set all the
transmitter functions and
personalize the menu (IF2X is
required), see suitable manual for
details.
ACCESS TO THE CONFIGURATION MENU BY THE KEYBOARD
Factory pre-setting: QUICK START MENU=ON
ACCESS TO THE CONFIGURATION MENU
ACCESS TO THE CONFIGURATION MENU BY ISOCON INTERFACE